GuidesHardwareVendorsHelpDeveloperDiscord

Offline Remote Setup

What you need

Important

Only the first channel on the remote will work. This is because the channel is not yet configurable on OpenShock's side.

Offline Remote ID

If you bought an offline remote from a vendor, it might already have been decoded and the Offline Remote ID might be present as a sticker on the remote. You can also decode this ID yourself using a 433 MHz receiver module with an ESP32 — check out the rf-playground repo.

Setup the Offline Remote

  1. Log in to the website.
  2. Connect your hub to a power source and make sure it appears as online in the Hubs section.
  3. Go to the Shockers section.
  4. Edit the Shocker to use with the Offline Remote:
    • Open the context menu of the Shocker.
    • Select Edit.
    • Set the Shocker RfId field to the Offline Remote ID.
    • Save.
  5. Re-pair the Shocker.

Everything should work now, have fun! 🎉

Last updated on

Share codes

Previous Page

Using the E-Stop 101

Next Page

On this page

What you need
Setup the Offline Remote